Removal and Installation
WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the glove compartment door completely.
- Disconnect the GPSM electrical connector.
- Remove the GPSM by pushing back on the locking tab.
- To install, reverse the removal procedure.
- If a new GPSM is being installed, carry out the PMI for the GPSM. For additional information, refer to MODULE CONFIGURATION SYSTEM .
NOTE:
The GPSM can be accessed through the glove compartment opening.