Section 2074 (Starting System - F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item |
Specification |
| Normal engine cranking speed |
140-220 RPM |
| Starter motor maximum load |
800 amps |
| Starter motor maximum voltage drop (engine at normal operating temperature) |
0.5 volt |
| Starter motor minimum stall torque (at 5 volts) |
14.7 Nm (10.8 lb-ft) |
| Starter motor no load current draw |
60-84 amps |
| Starter motor normal load current draw |
130-220 amps |
TORQUE SPECIFICATIONS
| Description |
Nm |
lb-ft |
lb-in |
| Starter motor mounting bolts - 3.5L Gasoline Turbocharged Direct Injection (GTDI) and 3.7L |
48 |
35 |
- |
| Starter motor mounting bolts - 5.0L (4V) and 6.2L (2V) |
25 |
18 |
- |
| Starter motor mounting stud bolts - 5.0L (4V) and 6.2L (2V) |
25 |
18 |
- |
| Starter motor ground cable nut - 5.0L (4V) and 6.2L (2V) |
25 |
18 |
- |
| Starter solenoid B+ terminal nut |
12 |
- |
106 |
| Starter solenoid S-terminal nut |
5 |
- |
44 |