Section 2482 (Exhaust System): Specifications
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Exhaust heat shield bolts | 15 | - | 133 | ||
| Exhaust intermediate pipe-to-muffler and tail pipe assembly Torca® clamp | 47 | 35 | - | ||
| Exhaust tip assembly Torca® clamp | 47 | 35 | - | ||
| Exhaust Y-pipe dual catalytic converter-to-exhaust intermediate pipe bolts (1) | - | - | - | ||
| Exhaust Y-pipe dual catalytic converter-to-exhaust manifold or turbocharger nuts(1) | - | - | - | ||
| Front muffler isolator and bracket assembly bolts | 30 | 22 | - | ||
| LH isolator cap bolt | 55 | 41 | - | ||
| Muffler inlet pipe bracket support isolator bolts (3.5L Gasoline Turbocharged Direct Injection (GTDI) vehicles only) | 30 | 22 | - | ||
| Rear tailpipe hanger isolator bolts | 30 | 22 | - | ||
| Rear muffler isolator and bracket assembly bolt | 30 | 22 | - | ||
| RH catalytic converter-to-LH catalytic converter Torca® clamp | 55 | 41 | - | ||
| Transfer case skid plate bolts | 24 | 18 | - | ||
| Transmission crossmember bolts and nuts | 90 | 18 | - | ||
| Transmission insulator and retainer/exhaust bracket assembly bolts (Four-Wheel Drive (4WD) vehicles only) | 90 | 66 | - | ||
| Transmission insulator and retainer/exhaust bracket assembly bolts | 90 | 66 | - | ||
| Transmission insulator and retainer/exhaust support bracket assembly nuts | 103 | 76 | - | ||
| Worm gear clamp | 7 | - | 62 | ||
|
|||||