Section 2506 (Engine Cooling System): Specifications
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® Metal Surface Prep ZC-31-B |
- | - |
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A | - |
| Motorcraft® Silicone Gasket Remover ZC-30-A |
- | - |
| Motorcraft® Orange Antifreeze/Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada) |
WSS-M97B44-D | 3.5L Gasoline Turbocharged Direct Injection (GTDI) - 15.6L (16.5 qt), 3.7L - 15.1L (16.0 qt), 5.0L - 16.1L (17.0 qt), 6.2L - 18.5L (19.5 qt) |
| Motorcraft® Orange Antifreeze/Coolant Prediluted VC-3DIL-B (US); CVC-3DIL-B (Canada) |
WSS-M97B44-D2 | 3.5L Gasoline Turbocharged Direct Injection (GTDI) - 15.6L (16.5 qt), 3.7L - 15.1L (16.0 qt), 5.0L - 16.1L (17.0 qt), 6.2L - 18.5L (19.5 qt) |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Pressure Tests | |
| Complete cooling system maximum pressure | 110 kPa (16 psi) |
| Pressure relief cap | 110 kPa (16 psi) |
| Radiator (out of vehicle) | 138 kPa (20 psi) |
| Thermostat Opening Temperatures - 3.5L Gasoline Turbocharged Direct Injection (GTDI) | |
| Starts to open | 83.8-90.6°C (183-195°F) |
| Fully open | 98.8°C (210°F) |
| Thermostat Opening Temperatures - 3.7L | |
| Starts to open | 83.8-90.6°C (183-195°F) |
| Fully open | 98.8°C (210°F) |
| Thermostat Opening Temperatures - 5.0L | |
| Starts to open | 87.5°C (189.5°F) |
| Fully open | 100°C (212°F) |
| Thermostat Opening Temperatures - 6.2L (2V) | |
| Starts to open | 88-92°C (190.4-197.6°F) |
| Fully open | 104°C (219.2°F) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| A/C fitting nut and bolt | 15 | - | 133 | ||
| Air dam bolts | 20 | - | 177 | ||
| Air dam nuts | 20 | - | 177 | ||
| Battery Junction Box (BJB) bolts | 10 | - | 89 | ||
| Block heater - 5.0L, 6.2L | 40 | 30 | - | ||
| Block heater bolt - 3.5L Gasoline Turbocharged Direct Injection (GTDI), 3.7L | 6 | - | 53 | ||
| Coolant crossover manifold assembly bolts (1) | - | - | - | ||
| Coolant expansion tank module bolts | 15 | - | 133 | ||
| Coolant inlet connector bolt - 3.5L Gasoline Turbocharged Direct Injection (GTDI), 3.7L, 5.0L | 10 | - | 89 | ||
| Coolant outlet connection bolts - 6.2L | 10 | - | 89 | ||
| Coolant pump bolts - 3.5L GTDI , 3.7L(1) | - | - | - | ||
| Coolant pump bolts - 5.0L(1) | - | - | - | ||
| Coolant pump bolts - 6.2L(1) | - | - | - | ||
| Coolant pump pulley bolts | 25 | 18 | - | ||
| Cooling fan motor and shroud bolts | 7 | - | 62 | ||
| Cooling module bolts | 30 | 22 | - | ||
| Degas bottle bolts | 17 | - | 150 | ||
| Front bumper cover bracket bolts | 3 | - | 27 | ||
| Front wheel moulding nuts | 3 | - | 27 | ||
| Front bumper cover bracket bolts | 3 | - | 27 | ||
| Generator positive cable nut | 9 | - | 80 | ||
| Heater outlet tube bolt | 10 | - | 89 | ||
| Hood latch bolts | 25 | 18 | - | ||
| Hood latch release handle bolt | 8 | - | 71 | ||
| Intake manifold bolt | 10 | - | 89 | ||
| LH turbocharger-to-Charge Air Cooler (CAC) tube bracket bolt | 6 | - | 53 | ||
| LH turbocharger-to-CAC tube clamp | 5 | - | 44 | ||
| Positive battery cable nut - 6.2L | 9 | - | 80 | ||
| Power steering fluid reservoir bolt | 11 | - | 97 | ||
| Radiator bolts | 15 | - | 133 | ||
| Thermostat housing bolts - 3.5L GTDI , 3.7L(1) | - | - | - | ||
| Thermostat housing bolts - 5.0L | 10 | - | 89 | ||
| Transmission cooler tube bolt - 3.5L GTDI , 3.7L and 5.0L engines | 12 | - | 106 | ||
|
|||||