Audio Control Module (ACM) Self-Diagnostic Mode
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the Audio Front Control Module (ACM), Front Control/Display Interface Module (FCDIM) (if equipped), Front Controls Interface Module (FCIM), or Front Display Interface Module (FDIM) (if equipped) are inoperative (blank or do not power on), obtain the ACM
part number by referencing the label attached to the ACM
chassis.
- Turn the ACM on.
- Operate the audio system in radio tuner AM/FM mode.
- Press and hold the EJECT button, and within 1 second, press and hold the SEEK UP button until the speaker walk-around test begins.NOTE: AHU Diagnostics refers to the ACM , EFP Diagnostics refers to the FCIM , and MFD Diagnostics (if supported) refers to the FCDIM (if equipped).
- To exit the self-diagnostic mode, turn the ACM off, or select "Exit Diagnostics."