Pinpoint Test G : The BLIS® And CTA System Cannot Be Turned Off In The IPC Message Center: Notes
WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Vehicle Emergency Messaging System , for schematic and connector information.
Normal Operation and Fault Conditions
The BLIS® and/or CTA system are turned off for one key cycle only when using the message center switches. Permanently disabling the BLIS® and/or CTA system is carried out in the Integrated Diagnostic System (IDS) programmable parameters menu.
REFER to BLIS® and CTA Message Display in Blind Spot Monitoring .
Possible Sources
- Wiring, terminals and connectors
- IPC