LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 3015 (Climate Control System - General Information) >> Removal And Installation >> Climate Control Housing >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Climate Control Housing: Installation

WARNING: This page is about a different car, the 2016 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: Only use the specified material to lubricate the seals.

    Install new O-ring seals.

    Material: Motorcraft ® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B)

  1. 3.

    Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to: Refrigerant Oil Adding .

  1. 4.

    Fill and bleed the cooling system. Refer to filling and bleeding without a vacuum cooling system filler. Refer to: Cooling System Draining, Vacuum Filling and Bleeding - 2.7L . Refer to: Cooling System Draining, Vacuum Filling and Bleeding - 3.5L Duratec . Refer to: Cooling System Draining, Vacuum Filling and Bleeding - 3.5L EcoBoost . Refer to: Cooling System Draining, Vacuum Filling and Bleeding - 5.0L .
scientia non olet · About LEMON Manuals