Torque Specifications
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Band adjustment screw | 14 | 10 | |
| Center support screw | 11 | 8 | - |
| Converter housing-to-case screws | 47 | 35 | - |
| Converter housing-to-engine screws | 55 | 41 | - |
| Crossmember bolts | 99 | 73 | - |
| Digital transmission range (TR) sensor screws | 10 | - | 89 |
| Extension housing screws and studs | 45 | 33 | - |
| Fluid pump screws | 26 | 19 | - |
| Front band lock nut | 54 | 40 | - |
| HO2S connector bracket nut | 20 | 15 | - |
| Intermediate band lock nut | 54 | 40 | - |
| Intermediate shaft speed sensor screw | 10 | - | 89 |
| Low/Reverse servo cover screws | 13 | 10 | - |
| Main control valve body screws | 10 | - | 89 |
| Manual control outer lever nut | 48 | 35 | - |
| Manual valve detent spring screw | 10 | - | 89 |
| Manual valve inner lever nut | 48 | 35 | - |
| Output shaft speed (OSS) sensor screw | 10 | - | 89 |
| Pressure plug to case (line and EPC) | 10 | - | 89 |
| Rear driveshaft bolts | 103 | 76 | - |
| Rear engine cover plate | 10 | - | 89 |
| Rear vibration damper | 30 | 22 | - |
| Separator plate screws | 7 | - | 62 |
| Solenoid clamp screws | 7 | - | 62 |
| Torque converter-to-flexplate nuts | 35 | 26 | - |
| Transmission cooler line nut | 29 | 21 | - |
| Transmission fluid filter screw | 10 | - | 89 |
| Transmission fluid pan screws | 16 | 12 | - |
| Transmission servo heat shield nut | 10 | - | 89 |
| Transmission mount nuts to crossmember | 90 | 66 | - |
| Transmission mount-to-extension housing screws | 90 | 66 | - |
| Transmission selector lever bracket-to-case screws | 60 | 40 | - |
| Turbine shaft speed (TSS) sensor screw | 10 | - | 89 |