System Airflow Description - Manual Climate Control: Panel

When PANEL is selected:

• The air inlet door vacuum control motor is at no vacuum, admitting only outside air into the passenger compartment.
• The panel/defrost door vacuum control motor is at full vacuum and the panel/floor door vacuum control motor is at no vacuum, directing airflow to the instrument panel A/C registers. A small amount of airflow from the side window demisters will be present.
• The heater control valve is at no vacuum, allowing the flow of hot coolant to the heater core. Blended air temperature is available.
• The temperature can be adjusted to heat the air, but the air cannot be cooled below the outside temperature.
• The blower motor is ON.
• The A/C compressor will not operate.