Inspection and Verification: Notes
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If any concerns are noted with the speedometer, stoplamp, or horn, address those concerns by referring to the appropriate procedures before continuing speed control diagnosis.
- Verify the customer concern.
- Visually inspect the following for obvious signs of mechanical and electrical damage.VISUAL INSPECTION CHART
Mechanical Electrical - Speed control cable
- Smart junction box (SJB) fuse(s):
- 20 (10A) (speed control actuator)
- 26 (2A) (speed control deactivator switch)
- 32 (5A) (stoplamp switch)
- Speed control deactivator switch
- Circuitry
- SJB
- Speed control actuator
- Speed control switches
- Clutch pedal position (CPP) switch
- If the fault is not visually evident, verify the symptom and refer to the self-test diagnostics.