Removal And Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row in this service information.

1.

Separate the J-clips and open the cushion cover.

Courtesy of FORD MOTOR COMPANY

2.

NOTE: Typical cushion cover retainer shown, others similar.

From under the seat, pull the 4 cushion cover retainers out from between the cushion frame and seat track.

Courtesy of FORD MOTOR COMPANY

3.

Remove the cushion Thermo-Electric Device (TED).
1. 1.
  
  Disengage the pin-type retainer and disconnect the electrical connector.
1. 2.
  
  Remove the 2 screws.
1. 3.
  
  Remove the screw.
1. 4.
  
  Disengage the 2 pin-type retainers.
  - If necessary, remove the mounting bracket.

Courtesy of FORD MOTOR COMPANY

4.

To assemble, reverse the disassembly procedure.