Removal And Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the affected seat backrest. For additional information, refer to Seat Backrest - Third Row, Power in this service information.

2.

Release the backrest cover upper J-clip under the head restraint.

3.

NOTE: Use care when separating the backrest cover from the hook-and-loop strips, or the hook-and-loop strips may be torn from the backrest foam pad.

Separate the hook-and-loop strips, invert the backrest cover all the way up and remove.
- At installation, feed the straps back through the backrest cover.

4.

To install, reverse the removal procedure.