Front Disc Brake: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Clean and dry the brake disc-to-wheel hub mounting surface and apply a thin coat of anti-seize where indicated.

Fig 1: Applying A Thin Coat Of Anti-Seize Where Indicated

Courtesy of FORD MOTOR CO.

NOTE: Make sure the brake disc is clean and free of any foreign material.

Install the brake disc.
Position the brake caliper and anchor plate assembly and install the brake caliper anchor plate bolts.
- Tighten to 133 Nm (98 lb-ft).
Install the wheel and tire assembly. For additional information, refer to WHEELS AND TIRES .