DTC P025A: Fuel Pump Module A Control Circuit/Open
P025A - FUEL PUMP MODULE A CONTROL CIRCUIT/OPEN
| Description: The PCM monitors the fuel pump command (FPC) circuit for a concern. When the PCM commands the fuel pump (FP) ON, the PCM is able to detect a short to voltage on the FPC circuit. When the PCM commands the FP OFF, the PCM is able to detect an open circuit or a short to ground on the FPC circuit. The test fails if the voltage is less than or greater than a calibrated limit, for a calibrated amount of time. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Check for any harness concerns. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST KC . | ||