DTC U2016: Control Module Main Software System Internal Failure
DTC U2016: CONTROL MODULE MAIN SOFTWARE SYSTEM INTERNAL FAILURE
| Description: | This DTC sets when an internal TCM failure occurs. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Clear the SOBDMC DTCs. Repeat the self-test. If the DTC is retrieved again, install a new TCM. Refer to the appropriate Automatic Transmission article. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the TRID Block for a Replacement TCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. Refer to the appropriate articles related to the description, possible causes and diagnostic aids. |
||