Clear MyKey™

NOTE: If disabling an IA key, make sure only the admin key is inside the vehicle. It does not need to be in the backup transceiver slot.

NOTE: This procedure clears the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.

Using an admin key, turn the ignition to RUN.
From the message center main menu, use the up and down arrow buttons to scroll to and select Settings. Press the OK button.
Use the up and down arrow buttons to scroll to and select MyKey. Press the OK button.
Use the up and down arrow buttons to scroll to and select Clear MyKeys. Press the OK button.