DTC Chart: HVAC Control Module
WARNING: This page is about a different car, the 2015 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Some PCM Diagnostic Trouble Codes (DTCs) may inhibit A/C operation. If any PCM Diagnostic Trouble Codes (DTCs) are retrieved, diagnose those first. Refer to the DTC Chart: PCM .
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .
HVAC Control Module DTC Chart
| DTC | Description | Action |
|---|---|---|
| B105A:00 | Cabin Temperature Sensor Fan: No Sub Type Information | GO to Pinpoint Test E |
| B1081:00 | Left Temperature Damper Motor: No Sub Type Information | GO to Pinpoint Test N |
| B1082:00 | Right Temperature Damper Motor: No Sub Type Information | GO to Pinpoint Test G |
| B1083:00 | Recirculation Damper Motor: No Sub Type Information | GO to Pinpoint Test I |
| B1085:00 | Defroster Damper Motor: No Sub Type Information | GO to Pinpoint Test J |
| B1086:00 | Air Distribution Damper Motor: No Sub Type Information | GO to Pinpoint Test J |
| B10B3:00 | Right Panel Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B4:00 | Right Floor Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B5:00 | Left Panel Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B6:00 | Left Floor Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B8:00 | Push Buttons: No Sub Type Information | INSTALL a new HVAC control module. Refer to: Heating, Ventilation and Air Conditioning (HVAC) Control Module . |
| B10B9:00 | Blower Control: No Sub Type Information | GO to Pinpoint Test P |
| B1A61:00 | Cabin Temperature Sensor: No Sub Type Information | GO to Pinpoint Test E |
| B1A63:00 | Right Solar Sensor: No Sub Type Information | GO to Pinpoint Test T |
| B1A64:00 | Left Solar Sensor: No Sub Type Information | GO to Pinpoint Test T |
| B1A69:00 | Humidity Sensor: No Sub Type Information | GO to Pinpoint Test E |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test Q |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test R |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | GO to Pinpoint Test Q |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | INSTALL a new HVAC control module. Refer to: Heating, Ventilation and Air Conditioning (HVAC) Control Module . |
| U2101:00 | Control Module Configuration Incompatible | INSTALL a new HVAC control module. Refer to: Heating, Ventilation and Air Conditioning (HVAC) Control Module . |
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new HVAC control module. Refer to: Heating, Ventilation and Air Conditioning (HVAC) Control Module . |
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | GO to Pinpoint Test S |
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | GO to Pinpoint Test S |