Module Network Input Messages - DDM and PDM
WARNING: This page is about a different car, the 2015 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Broadcast Message |
Originating Module |
Message Purpose |
| Outer mirror defrost command |
BCM |
Based on the defrost request message from the HVAC module, the BCM uses this message to command the heated mirrors on or off. |
| Broadcast Message |
Originating Module |
Message Purpose |
| Mirror Position Store Request |
DSM |
Used to command the DDM and PDM to save the current mirror position to a specific memory preset. |
| Mirror Position Load Request |
DSM |
Used to command the DDM and PDM to recall a specific memory preset mirror position. |