LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 325 (Information System And Entertainment System - Am/Fm/Cd/Sync/Touchscreen Display) >> Diagnosis And Testing >> Information and Entertainment System >> DTC Chart: FCIM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Chart: FCIM

WARNING: This page is about a different car, the 2014 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
DTC Description Action
B13DC:11 Compact Disc Slot Illumination: Circuit Short To Ground Refer to: INSTRUMENT PANEL CLUSTER (IPC) AND PANEL ILLUMINATION .
See DTC CHART: FRONT CONTROLS INTERFACE MODULE (FCIM)
B13DC:12 Compact Disc Slot Illumination: Circuit Short To Battery Refer to: INSTRUMENT PANEL CLUSTER (IPC) AND PANEL ILLUMINATION .
See DTC CHART: FRONT CONTROLS INTERFACE MODULE (FCIM)
B13DC:13 Compact Disc Slot Illumination: Circuit Open Refer to: INSTRUMENT PANEL CLUSTER (IPC) AND PANEL ILLUMINATION .
See DTC CHART: FRONT CONTROLS INTERFACE MODULE (FCIM)
U0155:87 Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message GO to PINPOINT TEST AJ 
U0257:87 Lost Communication With Front Controls/Display Interface Module: Missing Message
NOTE: Despite the description, this DTC  applies to the FDIM  , not the FCDIM 
GO to PINPOINT TEST AP 
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC  .
Refer to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
U2013:63 Switch Pack: Circuit/Component Protection Time-Out
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U2013:63 is retrieved again, INSTALL a new FCIM  .

    Refer to: FRONT CONTROLS INTERFACE MODULE (FCIM) .
U201A:51 Control Module Main Calibration Data: Not Programmed CHECK vehicle service history for recent service actions related to this module. This DTC  sets due to incomplete or incorrect PMI  procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool.
Refer to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
See PROGRAMMABLE MODULE INSTALLATION (PMI) . If there have been no recent service actions, INSTALL a new FCIM  to correct the failure to retain configuration data.
Refer to: FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:41 is retrieved again, INSTALL a new FCIM  .

    Refer to: FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:42 Control Module: General Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:42 is retrieved again, INSTALL a new FCIM  .

    Refer to: FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AQ 
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AR 
scientia non olet · About LEMON Manuals