LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Climate Control System - General Information And Diagnostics) >> Diagnosis And Testing >> Climate Control System >> Component Tests >> A/C Compressor - External Leak Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Compressor - External Leak Test

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the correct adapter from the A/C Flush Adapter Kit on the rear head of the A/C compressor, using the existing manifold retaining bolt.
  2. Connect the high- and low-pressure lines of a manifold gauge set or a refrigerant recovery/recycling station to the corresponding fittings on the adapter.
  3. Attach the center hose of the manifold gauge set to a refrigerant container standing in an upright position.
  4. Open the low-pressure gauge valve, the high-pressure gauge valve and the valve on the refrigerant container to allow the refrigerant vapor to flow into the A/C compressor.
  5. Using the Refrigerant Leak Detector, check for leaks at the compressor shaft.
  6. If an external leak is found, install a new A/C compressor. Refer to CLIMATE CONTROL .
  7. When the leak test is complete, recover the refrigerant from the compressor.
scientia non olet · About LEMON Manuals