Remote Function Actuator (RFA) Module: Removal
WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation.
Upload the module configuration information from the RFA module into the scan tool by following the scan tool on screen instructions.
- Remove the glove box. Refer to INSTRUMENT PANEL AND CONSOLE .
- Remove the RFA
module.
- Disconnect the RFA module electrical connectors.
- Remove the RFA module nuts.