Key Programming Using Diagnostic Equipment
WARNING: This page is about a different car, the 2015 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Programming
- 1.WARNING: Before beginning any service procedure in this article, refer to Health and Safety Precautions Failure to follow this instruction may result in serious personal injury.
Refer to: Health and Safety Precautions .
- 2.NOTE: To enter the PATS security access if no programmed passive keys are available, start a vehicle session using a tear tag or PCM part number. The PATS security access can still be granted even with the ignition off.
Refer to: Diagnostic Methods .
- 3.
From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the on-screen instructions to enter PATS security access.
- 4.NOTE: A maximum of 8 keys can be programmed into the vehicle.
- From the diagnostic scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to program the passive key(s).
- Refer to Backup Starting .
NOTE: When prompted by the scan tool, place the passive key next to the PATS transceiver.