Disabling Transport or Factory Mode

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION . Failure to follow this instruction may result in serious personal injury.

Place the ignition in the OFF position.
Verify the battery is fully charged. Refer to BATTERY, MOUNTING AND CABLES .
NOTE: ON vehicles with intelligent access (IA), place a programmed IA key in the passive anti-theft system (PATS) transceiver slot.

Place the ignition in the ON position.

NOTE: Steps 4 and 5 must be carried out within 10 seconds.
Press and release the brake pedal 5 times.
Press and release the hazard switch 2 times (on, off).
NOTE: When exiting Factory mode, the instrument panel cluster (IPC) message center will indicate NORMAL MODE when the procedure has been successfully completed.

Place the ignition in the OFF position.