LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Expedition XLT, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Universal Transmitter - Remote Convenience System >> General Procedures >> Universal Transmitter Programming >> Universal Transmitter Programming (Rolling Code) - Early Build (Homelink®)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Universal Transmitter Programming (Rolling Code) - Early Build (Homelink®)

NOTE: It may be helpful to have an assistant with this procedure.
  1. At the garage door opener receiver (the motor-head unit) in the garage, locate the "learn" or "smart" button. This can usually be found near where the hanging antenna wire is attached to the motor-head unit; or it may be under the light bulb cover of the motor-head unit.
  2. Turn the ignition to the ON position.
    3. NOTE: Step 4 must be initiated within 30 seconds of pressing and releasing the "learn" or "smart" button.
  3. Firmly press and release the "learn" or "smart" button. (The name and color of the button may vary by manufacturer).
  4. Return to the vehicle and firmly press, hold for 2 seconds and release the programmed universal transmitter button. Repeat the press/hold/release sequence a second time and depending on the brand of the garage door opener (or other rolling code-equipped device), repeat this sequence a third time to complete the programming process.
scientia non olet · About LEMON Manuals