Clear MyKey™

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This procedure is used to clear the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.

Insert an admin key into the ignition lock cylinder and turn the key to the RUN position.
Press SETUP until PRESS RESET TO CLEAR MYKEY appears.
Press and release the RESET button until HOLD RESET TO CONFIRM CLEAR.
Press and hold the RESET button until ALL MYKEYS CLEARED is displayed.
- A MyKey™ can also be cleared during the same key cycle that it was programmed by following Steps 2, 3 and 4 of this procedure.