LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> F-150 Limited, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Specifications >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

Description Nm lb-ft lb-in
Exhaust heat shield bolts 15 - 133
Exhaust intermediate pipe-to-muffler and tail pipe assembly Torca® clamp 47 35 -
Exhaust tip assembly Torca® clamp 47 35 -
Exhaust Y-Pipe - Dual Catalytic Converter-to-exhaust intermediate pipe bolts(1) - - -
Exhaust Y-Pipe - Dual Catalytic Converter-to-exhaust manifold or turbocharger nuts(1) - - -
Front muffler isolator and bracket assembly bolts 30 22 -
LH isolator cap bolt 55 41 -
Muffler inlet pipe bracket support isolator bolts (3.5L Gasoline Turbocharged Direct Injection (GTDI) vehicles only) 30 22 -
Rear tailpipe hanger isolator bolts 30 22 -
Rear muffler isolator and bracket assembly bolt 30 22 -
RH catalytic converter-to-LH catalytic converter Torca® clamp 55 41 -
Transfer case skid plate bolts 24 18 -
Transmission crossmember bolts and nuts 90 18 -
Transmission insulator and retainer/exhaust bracket assembly bolts (Four-Wheel Drive (4WD) vehicles only) 90 66 -
Transmission insulator and retainer/exhaust bracket assembly bolts 90 66 -
Transmission insulator and retainer/exhaust support bracket assembly nuts 103 76 -
Worm gear clamp 7 - 62
(1) Refer to the appropriate procedures in this information.