DTC P0604: Internal Control Module Random Access Memory (Ram) Error
DTC P0604: INTERNAL CONTROL MODULE RANDOM ACCESS MEMORY (RAM) ERROR
| Description: | Indicates the PCM RAM has been corrupted. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the appropriate Description article, Possible Causes and Diagnostic Aids for the DTC. | ||