Audio Front Control Module (ACM) Self-Test
- Refer to: HEALTH AND SAFETY PRECAUTIONS .
-
NOTE: If the ACM, FCDIM (if equipped), FCIM, or FDIM (if equipped) are inoperative (blank or do not power on), obtain the ACM part number by referencing the label attached to the ACM chassis.
Turn the ACM on. - Operate the audio system in radio tuner AM / FM mode.
- Press and hold the eject button, and within 1 second, press the seek up button. If supported, the speaker walk test will begin, and the display will indicate each speaker as it is tested.NOTE: AHU Diagnostics refers to the ACM, EFP Diagnostics refers to the FCIM, and MFD Diagnostics (if supported) refers to the FCDIM (if equipped).
- To exit the self-diagnostic mode, turn the ACM off, or select "Exit Diagnostics."
WARNING:
Before beginning any service procedure in this service information, refer to Safety Warnings in
SERVICE INFORMATION
General Information. Failure to follow this instruction may result in serious personal injury.