LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Focus S, Automatic DCT Trans, Gas >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Pinpoint Test Do: Barometric Pressure (BARO) Sensor Through Pinpoint Test FB: Power Take Off (PTO) - (Except Diesel & Hybrid) >> Pinpoint Test DV: Throttle Body Assembly Electronic Throttle Control (ETC) >> Introduction >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test DV: Throttle Body Assembly Electronic Throttle Control (ETC): Introduction: Notes

WARNING: SUBSTANTIAL OPENING AND CLOSING TORQUE IS APPLIED BY THIS SYSTEM. TO PREVENT INJURY, BE CAREFUL TO KEEP FINGERS AWAY FROM THROTTLE MECHANISM WHEN ACTUATED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

This pinpoint test is intended to diagnose the following:

Fig 2: Identifying Electronic Throttle Body Throttle Position Sensor (ETBTPS) Connector (2 Of 2)
G08291478Courtesy of FORD MOTOR CO.
Fig 3: Identifying Electronic Throttle Body Throttle Actuator Control Motor (ETBTACM) Connector (1 Of 2)
G08291479Courtesy of FORD MOTOR CO.
Fig 4: Identifying Electronic Throttle Body Throttle Actuator Control Motor (ETBTACM) Connector (2 Of 2)
G08291480Courtesy of FORD MOTOR CO.