LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Focus S, Automatic DCT Trans, Gas >> Repair and Diagnosis (Single Page) >> Quick Lookups >> DTC Index (Except Electric) >> Information & Entertainment System - Sync/SONY Am/Fm/Cd DTCS >> Global Positioning System Module (GPSM) - Sony Sound DTC Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Global Positioning System Module (GPSM) - Sony Sound DTC Table

GPSM DTC CHART - SONY SOUND

DTC Description Action
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to Pinpoint Test AE
U0155:00 Lost Communication With IPC Control Module: No Sub Type Information GO to Pinpoint Test AG
U0422:00 Invalid Data Received from Body Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the BCM. REFER to: BODY CONTROL MODULE (BCM) .
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC. REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
U2100:00 Initial Configuration Not Complete: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the diagnostic scan tool. REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION . See Programmable Module Installation (PMI). If there have been no recent service actions, INSTALL a new GPSM to correct the failure to retain configuration data. REFER to: Global Positioning System Module (GPSM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the diagnostic scan tool. REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION . See Programmable Module Installation (PMI). If there have been no recent service actions, INSTALL a new GPSM to correct the failure to retain configuration data. REFER to: Global Positioning System Module (GPSM) .
U3000:09 Control Module: Component Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:09 is retrieved again, PERFORM a battery reset by disconnecting the battery for 5 minutes, then reconnecting it.
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:09 is retrieved again, INSTALL a new GPSM.

    REFER to: Global Positioning System Module (GPSM) .

U3000:41 Control Module: General Checksum Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:41 is retrieved again, INSTALL a new GPSM.

    REFER to: Global Positioning System Module (GPSM) .

U3000:42 Control Module: General Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:42 is retrieved again, INSTALL a new GPSM.

    REFER to: Global Positioning System Module (GPSM) .

U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AM
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AN