Powertrain Control Module (PCM): Removal

NOTE: Removal steps in this procedure may contain installation details.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions ( HEALTH AND SAFETY PRECAUTIONS ).

NOTE: Powertrain Control Module (PCM) installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the PATS.

NOTE: This step is only necessary when installing a new component.

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure.
Refer to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .

General Equipment : Ford Diagnostic Equipment
Remove the LH inner fender splash shield.
Refer to: FENDER SPLASH SHIELD .
Torque : 3 Nm

Fig 1: Locating Powertrain Control Module Cover Mounting Screws
Courtesy of FORD MOTOR CO.
Fig 2: Locating Powertrain Control Module Bolts
Courtesy of FORD MOTOR CO.