LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System -- Except Electric >> Diagnosis and Testing >> Climate Control System - Vehicles With: Dual Automatic Temperature Control >> Diagnostic Overview >> Component Test- Air Conditioning (AC) Compressor External Leak Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Test- Air Conditioning (AC) Compressor External Leak Test

  1. Install the adapter from the A/C Flush Adapter Kit on the port of the A/C compressor, using the existing manifold retaining bolt.
  2. Connect the high and low pressure lines of a manifold gauge set or a refrigerant recovery/recycling station to the corresponding fittings on the adapter.
  3. Attach the center hose of a manifold gauge set to a refrigerant container standing in an upright position.
  4. Open the low pressure gauge valve, the high pressure gauge valve and the valve on the refrigerant container to allow the refrigerant vapor to flow into the A/C compressor.
  5. Using the Refrigerant Leak Detector, check for leaks at the compressor shaft.
  6. If an external leak is found, install a new A/C compressor.
  7. When the leak test is complete, recover the refrigerant from the compressor.
scientia non olet · About LEMON Manuals