LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Focus ST >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls - 2.0L ECOBOOST >> Removal and Installation >> Powertrain Control Module (PCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.
  1. Refer to: Health and Safety Precautions  ( HEALTH AND SAFETY PRECAUTIONS ).
    2. NOTE: This step is only necessary when installing a new component.
  2. Download the module information to the diagnostic tool using the Programmable Modules Installation routine.

    General Equipment  : Ford Diagnostic Equipment

  3. Remove the RH front inner fender splash shield. Refer to FRONT END BODY PANELS .
  4. Fig 1: Locating Powertrain Control Module Cover Mounting Screws
    G08056300Courtesy of FORD MOTOR CO.
  5. Fig 2: Locating Powertrain Control Module Bolts
    G08056301Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals