Section 99 (Fuel Charging System & Fuel Control System - 6.7L): Specifications
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil XO-10W30-QSD |
WSS-M2C171-E | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| High-pressure fuel injection pump gear backlash | 0.020-0.190 mm (0.0007-0.0074 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||||
|---|---|---|---|---|---|---|---|
| Heater core inlet tube bolts | 10 | - | 89 | ||||
| Fuel injector hold-down clamp bolts (1) | - | - | - | ||||
| Fuel injection pump supply tube bracket bolts | 10 | - | 89 | ||||
| Fuel injection pump supply tube bracket stud bolt | 10 | - | 89 | ||||
| Fuel injector supply tube fittings (1) | - | - | - | ||||
| Fuel injection pump supply tube manifold bolt | 10 | - | 89 | ||||
| Fuel rail bolts(1) | - | - | - | ||||
| Fuel rail supply tube bracket bolts | 10 | - | 89 | ||||
| Fuel rail supply tube bracket stud bolt | 10 | - | 89 | ||||
| Fuel rail supply tube fittings(1) | - | - | - | ||||
| High-pressure fuel injection pump drive gear nut (2) | 80 | 59 | - | ||||
| High-pressure fuel injection pump spacers | 24 | 18 | - | ||||
| PCM wiring harness bracket bolts | 10 | - | 89 | ||||
| Throttle Body (TB) bolts(1) | - | - | - | ||||
|
|||||||