Section 12 (Starting System - 2.0L DURATEC-He): Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Item | Nm | lb-ft | lb-in |
|---|---|---|---|
| Starter motor solenoid battery cable nut | 12 | - | 106 |
| Starter motor solenoid wire nut | 6 | - | 53 |
| Starter motor stud bolts | 35 | 26 | - |
| Support bracket nuts | 11 | - | 97 |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 RPM |
| Starting circuit maximum voltage drop (Engine at normal operating temperature) | 0.5 volt |
| Starter motor maximum load current draw | 800 amps |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |