Body Control Module (BCM) DTC Table
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B10D5:94 | PATS Antenna: Unexpected Operation | The BCM received an incomplete or corrupt response from the PATS transceiver. INSTALL a new PATS transceiver. REFER to: Passive Anti-Theft System (PATS) Transceiver . |
| B10D7:05 | PATS Key: System Programming Failure | GO to Pinpoint Test D |
| B10D7:81 | PATS Key: Invalid Serial Data Received | GO to Pinpoint Test E |
| B10D7:87 | PATS Key: Missing Message | GO to Pinpoint Test F |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed. PROGRAM additional keys (minimum of 2 keys must be programmed). REFER to: Key Programming Using Diagnostic Equipment . |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is an unprogrammed PATS PROGRAM the PATS key. REFER to: Key Programming Using Diagnostic Equipment . |
| B11CC:51 | Immobilizer Keyless Vehicle Secret key: Not Programmed | There is no RFA module ID stored in the BCM. CARRY OUT a parameter reset. REFER to: Passive Anti-Theft System (PATS) Parameter Reset . |
| B1399.05 | Personalized Key Synchronization: System Programming Failure | ERASE and PROGRAM all of the customer's keys. REFER to: Erase All Keys and Key Programming . |
| All other DTCs | - | REFER to: BODY CONTROL MODULE (BCM) . |