Pinpoint Test C : The Adjustable Steering Column Operates In One Second Intervals When Using The Steering Column Control Switch (Jog Mode): Notes

Refer to Adjustable Steering Column for schematic and connector information.

Normal Operation and Fault Conditions 

If an adjustable steering column tilt or telescopic motor sensor (reach motor) DTC sets (or if either of the sensor circuits become open), the DSM does not recall a programmed memory position or automatically position the steering column during the easy entry/exit operations. Under these fault conditions, the affected steering column motor operates in jog mode. Jog mode allows limited operation of the affected steering column motor using only the steering column control switch. When the steering column control switch is operated in jog mode, the steering column moves in the desired direction for one second, then stops regardless of the length of time the switch is activated. The steering column control switch must be released, then activated again in order to move the steering column for an additional second.

DTC Fault Trigger Conditions 

Possible Sources 

• Wiring, terminals or connectors
• Adjustable steering column tilt motor sensor (serviced with tilt motor)
• Adjustable steering column telescopic motor sensor (serviced with telescopic motor)
• DSM