Symptom Chart: Tire Pressure Monitoring System
WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the scan tool | Fuse Wiring, terminals or connectors Communication network concern BCM |
REFER to: Communications Network . |
| TPMS warning indicator is on continuously and the message center displays LOW TIRE PRESSURE | Refer to the Pinpoint Test | GO to PINPOINT TEST E : TPMS (TIRE PRESSURE MONITORING SYSTEM) WARNING INDICATOR IS ON CONTINUOUSLY AND THE MESSAGE CENTER DISPLAYS LOW TIRE PRESSURE . |
| TPMS warning indicator is on continuously and the message center does not display LOW TIRE PRESSURE | Diagnostic Trouble Codes (DTCs) present in the BCM Diagnostic Trouble Codes (DTCs) present in the RTM |
Using a diagnostic scan tool, RETRIEVE all Diagnostic Trouble Codes (DTCs) from the BCM and the RTM. For all BCM Diagnostic Trouble Codes (DTCs), GO to the DTC Chart: BCM . For all RTM Diagnostic Trouble Codes (DTCs), GO to the DTC Chart: RTM . |
| The BCM does not enter TPMS sensor training mode | Refer to the Pinpoint Test | GO to PINPOINT TEST F : THE BCM (BODY CONTROL MODULE) DOES NOT ENTER TPMS (TIRE PRESSURE MONITORING SYSTEM) SENSOR TRAINING MODE . |
| The TPMS warning indicator is never or always on | Communication network concern IPC |
REFER to: Instrumentation, Message Center and Warning Chimes . |
| One or more TPMS sensors do not train and no Diagnostic Trouble Codes (DTCs) are present | Refer to the Pinpoint Test | GO to PINPOINT TEST G : ONE OR MORE TPMS (TIRE PRESSURE MONITORING SYSTEM) SENSORS DO NOT TRAIN AND NO DIAGNOSTIC TROUBLE CODES (DTCS) ARE PRESENT . |