LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Fusion S >> Repair and Diagnosis >> Quick Lookups >> DTC Index (Except Hybrid) >> Information & Entertainment Systems (Am/Fm/Cd/Sync) DTCS >> GPSM DTC Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

GPSM DTC Table

DTC CHART - GPSM

DTC Description Action
U0100:00 Lost Communication with ECM/PCM "A": No Sub Type Information GO to PINPOINT TEST AA
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to PINPOINT TEST AB
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to PINPOINT TEST AC
U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information REFER to: BODY CONTROL MODULE (BCM) .
To retrieve and follow Diagnostic Trouble Codes (DTCs) in the BCM  .
U0423:00 Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
To retrieve and follow Diagnostic Trouble Codes (DTCs) in the IPC  .
U2100:00 Initial Configuration Not Complete: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC  sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data.
REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC  sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data.
REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:09 Control Module: Component Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:09 is retrieved again, PERFORM a battery reset by disconnecting the battery for 5 minutes, then reconnecting it.
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:09 is retrieved again, INSTALL a new GPSM  . REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:41 Control Module: General Checksum Failure CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:41 is still present, INSTALL a new GPSM  .
REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3000:42 Control Module: General Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:42 is still present, INSTALL a new GPSM  .
REFER to: GLOBAL POSITIONING SYSTEM MODULE (GPSM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AK
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AL