LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Fusion S >> Repair and Diagnosis >> Quick Lookups >> DTC Index (Except Hybrid) >> Parking Aid System DTCS >> Parking Aid Module (PAM) DTC Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parking Aid Module (PAM) DTC Table

PARKING AID MODULE (PAM) DTC CHART

DTC Description Action
B129C:12 Left Front Side Sensor: Circuit Short To Battery REFER to: PARKING AID .
B129C:14 Left Front Side Sensor: Circuit Short To Ground or Open REFER to: PARKING AID .
B129C:96 Left Front Side Sensor: Component Internal Failure REFER to: PARKING AID .
B129D:12 Right Front Side Sensor: Circuit Short To Battery REFER to: PARKING AID .
B129D:14 Right Front Side Sensor: Circuit Short To Ground or Open REFER to: PARKING AID .
B129D:96 Right Front Side Sensor: Component Internal Failure REFER to: PARKING AID .
B129E:11 Enable/Disable Switch - Semi - automatic Advanced Parallel Park: Circuit Short To Ground REFER to: PARKING AID .
B1303:11 Park Assist Switch: Circuit Short To Ground GO to PINPOINT TEST J
B1304:00 Electronic Power Assisted Steering System: No Sub Type Information REFER to: PARKING AID .
B1B36:12 Right Front Outer Sensor: Circuit Short To Battery GO to PINPOINT TEST G
B1B36:14 Right Front Outer Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST H
B1B36:96 Right Front Outer Sensor: Component Internal Failure GO to PINPOINT TEST I
B1B38:12 Right Front Inner Sensor: Circuit Short To Battery GO to PINPOINT TEST G
B1B38:14 Right Front Inner Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST H
B1B38:96 Right Front Inner Sensor: Component Internal Failure GO to PINPOINT TEST I
B1B40:12 Left Front Outer Sensor: Circuit Short To Battery GO to PINPOINT TEST G
B1B40:14 Left Front Outer Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST H
B1B40:96 Left Front Outer Sensor: Component Internal Failure GO to PINPOINT TEST I
B1B42:12 Left Front Inner Sensor: Circuit Short To Battery GO to PINPOINT TEST G
B1B42:14 Left Front Inner Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST H
B1B42:96 Left Front Inner Sensor: Component Internal Failure GO to PINPOINT TEST I
B1B44:12 Right Rear Outer Sensor: Circuit Short To Battery GO to PINPOINT TEST E
B1B44:14 Right Rear Outer Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST D
B1B44:96 Right Rear Outer Sensor: Component Internal Failure GO to PINPOINT TEST F
B1B46:12 Right Rear Inner Sensor: Circuit Short To Battery GO to PINPOINT TEST E
B1B46:14 Right Rear Inner Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST D
B1B46:96 Right Rear Inner Sensor: Component Internal Failure GO to PINPOINT TEST F
B1B48:12 Left Rear Outer Sensor: Circuit Short To Battery GO to PINPOINT TEST E
B1B48:14 Left Rear Outer Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST D
B1B48:96 Left Rear Outer Sensor: Component Internal Failure GO to PINPOINT TEST F
B1B50:12 Left Rear Inner Sensor: Circuit Short To Battery GO to PINPOINT TEST E
B1B50:14 Left Rear Inner Sensor: Circuit Short To Ground or Open GO to PINPOINT TEST D
B1B50:96 Left Rear Inner Sensor: Component Internal Failure GO to PINPOINT TEST F
B1B54:11 Function LED - Park Aid: Circuit Short To Ground GO to PINPOINT TEST K
B1B54:12 Function LED - Park Aid: Circuit Short To Battery GO to PINPOINT TEST K
B1B57:11 Front Sensors Power Circuit: Circuit Short To Ground GO to PINPOINT TEST B
B1B58:11 Rear Sensors Power Circuit: Circuit Short To Ground GO to PINPOINT TEST C
U0100:00 Lost Communication With ECM/PCM "A": No Sub Type Information GO to PINPOINT TEST L
U0101:00 Lost Communication with TCM: No Sub Type Information GO to PINPOINT TEST M
U0121:00 Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information GO to PINPOINT TEST N
U0131:00 Lost Communication With Power Steering Control Module: No Sub Type Information GO to PINPOINT TEST O
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to PINPOINT TEST P
U0146:00 Lost Communication With Gateway "A": No Sub Type Information GO to PINPOINT TEST Q
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to PINPOINT TEST R
U0212:00 Lost Communication With Steering Column Control Module: No Sub Type Information GO to PINPOINT TEST S
U0253:00 Lost Communication With Accessory Protocol Interface Module: No Sub Type Information GO to PINPOINT TEST T
U0293:00 Lost Communication With Hybrid/EV Powertrain Control Module: No Sub Type Information GO to PINPOINT TEST U
U0401:00 Invalid Data Received From ECM/PCM A: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the PCM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0402:00 Invalid Data Received From TCM: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the TCM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0415:00 Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the ABS  module with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0420:00 Invalid Data Received From Power Steering Control Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the PSCM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the BCM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0423:00 Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the IPC  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0429:00 Invalid Data Received From Steering Column Control Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the SCCM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0554:00 Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the APIM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0557:00 Invalid Data Received From Front Controls Interface Module "A": No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the FCIM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U0594:00 Invalid Data Received From Hybrid/EV Powertrain Control Module: No Sub Type Information This DTC  sets when the Parking Aid Module (PAM) receives invalid network data from the TCM  with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network.
U2024:41 Control Module Cal-Config Data: General Checksum Failure CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the Parking Aid Module (PAM) self-test. If DTC U2024:41 is retrieved again, PROGRAM the Parking Aid Module (PAM) REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
REPEAT the self-test. If DTC U2024:41 is retrieved again, INSTALL a new BCM.
REFER to: BODY CONTROL MODULE (BCM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information CHECK the vehicle service history for recent service actions related to this module. This DTC  sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT the Programmable Module Installation (PMI) procedure.
REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
If there have been no recent service actions, INSTALL a new BCM  .
REFER to: BODY CONTROL MODULE (BCM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information CHECK the vehicle service history for recent service actions related to this module. This DTC  sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT the Programmable Module Installation (PMI) procedure.
REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
If there have been no recent service actions, INSTALL a new BCM  .
REFER to: BODY CONTROL MODULE (BCM) .