BCM DTC Table
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B10D5:13 | PATS Antenna: Circuit Open | INSTALL a new PATS
transceiver. REFER to: PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER . |
| B10D7:05 | PATS Key: System Programming Failure | GO to PINPOINT TEST B |
| B10D7:51 | PATS Key: Not Programmed | PROGRAM the PATS
key in question. REFER to: ANTI-THEFT SECURITY ACCESS . |
| B10D7:87 | PATS Key: Missing Message | GO to PINPOINT TEST D |
| B10D7:8F | PATS Key: Erratic | GO to PINPOINT TEST C |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed (minimum of 2 keys must be programmed). CYCLE the customer's second key in the ignition key cylinder to program (when less than 2 keys are programmed, the BCM automatically programs the first 2 keys that are cycled in the ignition key cylinder). |
| B10D9:87 | PATS Transponder: Missing Message | GO to PINPOINT TEST E |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is no PCM
/SOBDMC
ID stored in the BCM
memory. PERFORM a parameter reset. REFER to: ANTI-THEFT SECURITY ACCESS . |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: BODY CONTROL MODULE (BCM) . |