LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Seating System - Front) >> Description And Operation >> Front Seats - System Operation and Component Description >> System Operation >> Multi-Contour Seat Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Contour Seat Operation

WARNING: This page is about a different car, the 2017 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

The multi-contour seats are independently controlled by the seat control switches (located on the outer side of the front seat cushions) or the FDIM (touchscreen). The driver and passenger front seats each contain a total of 7 inflatable bladders: 4 cushion bladders and 3 backrest lumbar bladders. The pressures for the lumbar and cushion bladders are displayed on the FDIM as a percentage of the maximum pressure.

There are 2 modes of operation: adjust or massage. Adjust mode allows pressure changes in one of the 3 lumbar bladders to be inflated or deflated to a desirable feel. Massage mode provides a sequence of inflation and deflation of the lumbar and cushion bladders to simulate a massage motion. When the massage mode is active, it will turn off (time-out) after 20 minutes of operation.

NOTE: Refer to the Owner's Literature for information how to select the various modes using the seat control switch or touchscreen buttons.

When in Adjust mode: 

When in Massage mode: 

Each multi-contour seat can be restored to the original factory settings by pressing and holding the select button greater than 30 seconds. This resets all the adjust and massage settings (including any multi-contour driver seat settings associated to memory personality 1, 2 or 3).