Powertrain Control Module (PCM): Installation

WARNING: This page is about a different car, the 2014 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new component.

Upload the module information from the diagnostic tool using the Programmable Modules Installation routine.

Use the General Equipment: Ford Diagnostic Equipment
NOTE: The step is only necessary when installing a new component.
- Carry out the Parameter Reset procedure.
- Vehicles without keyless entry and push button start.
  Refer to: ANTI-THEFT SECURITY ACCESS .
- Vehicles with keyless entry and push button start.
  Refer to: ANTI-THEFT SECURITY ACCESS .