Automatic Transaxle - 6F35 DTCS: Notes
AUTOMATIC TRANSAXLE - 6F35 DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description | Action |
|---|---|---|
| P0657 | Actuator supply voltage A circuit/open | GO to . |
| P0701 | Transmission control system range/performance | Non-electrical failure. REPAIR the more specific DTC first. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0706 | TR sensor A circuit range/performance. | REPAIR the more specific DTC first. GO to . |
| P0707 | TR sensor A circuit low. | REPAIR the more specific DTC first. GO to . |
| P0708 | TR sensor A circuit high. | REPAIR the more specific DTC first. GO to . |
| P0710 | TFT sensor A circuit | REPAIR the more specific DTC first. GO to . |
| P0711 | TFT sensor A circuit range/performance. | GO to . |
| P0712 | TFT sensor A circuit low. | REPAIR the more specific DTC first. GO to . |
| P0713 | TFT sensor A circuit high. | REPAIR the more specific DTC first. GO to . |
| P0715 | TSS sensor A circuit. | REPAIR the more specific DTC first. GO to . |
| P0717 | TSS sensor A circuit no signal. | REPAIR the more specific DTC first. GO to . |
| P0718 | TSS sensor A circuit intermittent. | GO to . |
| P0720 | OSS sensor circuit. | REPAIR the more specific DTC first. GO to . |
| P0721 | OSS sensor circuit range/performance. | GO to . |
| P0722 | OSS sensor circuit no signal. | REPAIR the more specific DTC first. GO to . |
| P0729 | Gear 6 incorrect ratio | Intermediate (2, 6) clutch or overdrive (4, 5, 6) clutch slip or failed to apply. REFER to the located in Specifications. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0731 | Gear 1 incorrect ratio | Forward (1, 2, 3, 4) clutch, low/reverse (L, R) clutch or OWC slip or failed to apply. REFER to the located in Specifications. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0732 | Gear 2 incorrect ratio | Forward (1, 2, 3, 4) clutch, or intermediate (2, 6) clutch failed to apply. REFER to the located in Specifications. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0733 | Gear 3 incorrect ratio | Forward (1, 2, 3, 4) clutch, or direct (3, 5, R) clutch failed to apply. REFER to the located in Specifications. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0734 | Gear 4 incorrect ratio | Forward (1, 2, 3, 4) clutch, or overdrive (4, 5, 6) clutch failed to apply. REFER to the located in Specifications. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0735 | Gear 5 incorrect ratio | Direct (3, 5, R) clutch, or overdrive (4, 5, 6) clutch failed to apply. REFER to the located in Specifications. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to . |
| P0740 | TCC solenoid circuit open | GO to . |
| P0741 | TCC solenoid circuit performance/stuck off. | DTC P0741 is a non-electrical DTC. CLEAR the DTCs. TEST the system for normal operation. If the DTC returns, REFER to Torque Converter Operation Concerns, No Apply in By Symptom. |
| P0742 | TCC solenoid circuit stuck on. | REPAIR the more specific DTC first. GO to . |
| P0743 | TCC solenoid circuit electrical. | REPAIR the more specific DTC first. GO to . |
| P0744 | TCC solenoid circuit intermittent. | REPAIR the more specific DTC first. GO to . |
| P0748 | LPC electrical. | REPAIR the more specific DTC first. GO to . |
| P0750 | SSA | REPAIR the more specific DTC first. GO to . |
| P0751 | SSA performance/stuck off. | REFER to . |
| P0752 | SSA stuck on. | REFER to . |
| P0753 | SSA electrical. | REPAIR the more specific DTC first. GO to . |
| P0754 | SSA intermittent. | GO to . |
| P0755 | SSB. | REPAIR the more specific DTC first. GO to . |
| P0756 | SSB performance/stuck off. | REFER to . |
| P0757 | SSB stuck on. | REFER to . |
| P0758 | SSB electrical. | REPAIR the more specific DTC first. GO to . |
| P0759 | SSB intermittent. | GO to . |
| P0760 | SSC. | REPAIR the more specific DTC first. GO to . |
| P0761 | SSC performance/stuck off. | REPAIR the more specific DTC first. REFER to . |
| P0762 | SSC stuck on. | REPAIR the more specific DTC first. REFER to . |
| P0763 | SSC electrical. | REPAIR the more specific DTC first. GO to . |
| P0764 | SSC intermittent. | GO to . |
| P0765 | SSD. | REPAIR the more specific DTC first. GO to . |
| P0766 | SSD performance stuck off. | REPAIR the more specific DTC first. REFER to . |
| P0767 | SSD stuck on. | REPAIR the more specific DTC first. REFER to . |
| P0768 | SSD electrical | REPAIR the more specific DTC first. GO to . |
| P0769 | SSD intermittent. | GO to . |
| P0770 | SSE. | REPAIR the more specific DTC first. GO to . |
| P0771 | SSE performance/stuck off. | REPAIR the more specific DTC first. GO to . |
| P0772 | SSE stuck on. | REPAIR the more specific DTC first. GO to . |
| P0773 | SSE electrical. | GO to . |
| P0774 | SSE intermittent. | GO to . |
| P07A5 | Transmission direct clutch stuck on. | REFER to . |
| P07A8 | Transmission low/reverse clutch performance/stuck off. | REFER to . |
| P07A9 | Transmission low/reverse clutch stuck on. | REFER to . |
| P07AA | Transmission overdrive clutch performance/stuck off. | REFER to . |
| P0815 | SelectSwtch™ upshift switch output circuit failure | REFER to . |
| P0816 | SelectSwtch™ downshift switch output circuit failure | REFER to . |
| P0867 | Transmission fluid pressure. | REFER to . |
| P0960 | LPC control circuit/open. | REPAIR the more specific DTC first. GO to . |
| P0961 | LPC control circuit range/performance. | GO to . |
| P0962 | LPC control circuit low. | REPAIR the more specific DTC first. GO to . |
| P0963 | LPC control circuit high. | REPAIR the more specific DTC first. GO to . |
| P0973 | SSA control circuit low. | REPAIR the more specific DTC first. GO to . |
| P0974 | SSA control circuit high. | REPAIR the more specific DTC first. GO to . |
| P0976 | SSB control circuit low. | REPAIR the more specific DTC first. GO to . |
| P0977 | SSB control circuit high. | REPAIR the more specific DTC first. GO to . |
| P0979 | SSC control circuit low. | REPAIR the more specific DTC first. GO to . |
| P0980 | SSC control circuit high. | REPAIR the more specific DTC first. GO to . |
| P0982 | SSD control circuit low. | REPAIR the more specific DTC first. GO to . |
| P0983 | SSD control circuit high. | REPAIR the more specific DTC first. GO to . |
| P0984 | SSE control circuit range/performance. | REPAIR the more specific DTC first. GO to . |
| P1500 | OSS sensor circuit. | REPAIR the more specific DTC first. GO to . |
| P1636 | Inductive signature chip communication error. | INSTALL a new PCM. REFER to or . |
| P163E | Transmission control module programming error. | REFER to . |
| P163F | TRID ID block corrupted, not programmed. | REFER to . |
| P1702 | TR sensor circuit intermittent. | REPAIR the more specific DTC first. GO to . |
| P1705 | TR circuit not indicating park/neutral during self-test. | Rerun KOEO or KOER only. |
| P1711 | TFT sensor out of self-test range. | RERUN KOEO or KOER only. |
| P1744 | TCC solenoid circuit. | REFER to . |
| P1780 | TCS (Overdrive (O/D) Cancel) circuit out of self-test range. | REFER to . |
| P1783 | Transmission over temperature condition. | REFER to . |
| P1910 | Reverse lamp control circuit/open. | REFER to . |
| P1921 | Transmission range signal | REPAIR the more specific DTC first. GO to . |
| P2700 | Transmission forward clutch apply time range/performance. | REPAIR the more specific DTC first. REFER to . |
| P2701 | Transmission direct clutch apply time range/performance. | REPAIR the more specific DTC first. REFER to . |
| P2702 | Transmission intermediate clutch apply time range/performance. | REPAIR the more specific DTC first. REFER to . |
| P2703 | Transmission low/reverse clutch apply time range/performance. | REPAIR the more specific DTC first. REFER to . |
| P2704 | Transmission overdrive clutch apply time range/performance. | REPAIR the more specific DTC first. REFER to . |
| P2705 | Transmission OWC apply time range/performance. | REFER to . |
| P2760 | TCC pressure control solenoid intermittent. | REPAIR the more specific DTC first. GO to . |
| P2783 | Torque converter temperature too high. | REFER to . |