BCM DTC Table
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B11C6:01 | Passenger Door External Antenna: General Electrical Failure | GO to PINPOINT TEST A |
| B11CA:01 | Driver Door External Antenna: General Electrical Failure | GO to PINPOINT TEST A |
| B10C7:01 | Interior Trunk Antenna: General Electrical Failure | GO to PINPOINT TEST A |
| B10C8:01 | Interior Centre Antenna: General Electrical Failure | GO to PINPOINT TEST A |
| B10D7:05 | PATS Key: System Programming Failure | DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. If no other Diagnostic Trouble codes (DTCs) are present, PROGRAM the suspect passive key again. If key programming fails, REPLACE the suspect passive key. PROGRAM the new passive key. REFER to: Anti-Theft Security Access . |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed (minimum of 2 keys must be programmed). PROGRAM the customer's second key. REFER to: Anti-Theft Security Access . |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is no PCM
/SOBDMC
ID stored in the BCM
memory. PERFORM a parameter reset. REFER to: Anti-Theft Security Access . |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: BODY CONTROL MODULE (BCM) . |