Diagnostic Aids
When DTC C1B00:2F is set, the PSCM will remove steering assist, and enter into a manual mode and transmit an invalid steering angle message over the HS-CAN bus. The PSCM sends a message to the IPC to display POWER STEERING ASSIST FAULT in the message center.
When DTC C1B00:62 is set, the PSCM will transmit an invalid steering angle message over the HS-CAN bus.
| Failure | Action |
|---|---|
| 2F | GO to PINPOINT TEST B |
| 62 | GO to PINPOINT TEST B |