DTC C200B: Steering Shaft Torque Sensor 1: Description

The PSCM continually monitors the steering shaft torque sensor when the ignition is ON and the voltage supply to the PSCM is above 6.5 volts.

• DTC C200B:2F (Steering Shaft Torque Sensor 1: Signal Erratic) - If the steering shaft torque sensor signal is outside the expected range, then DTC C200B:2F will be set.
• DTC C200B:61 (Steering Shaft Torque Sensor 1: Signal Calculation Failure) - If the steering shaft torque sensor signal is not within a certain threshold, then DTC C200B:61 will be set.
• DTC C200B:62 (Steering Shaft Torque Sensor 1: Signal Compare Failure) - If the steering shaft torque sensor signal does not match other sensor input, then DTC C200B:62 will be set.