LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Removal And Installation >> Steering Column Shroud >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

  1. Remove the LH scuff plate trim panel and the LH A-pillar lower trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the steering column opening trim panel. For additional information, refer to the INSTRUMENT PANEL -- EXPLODED VIEW .
  3. Remove the 4 bolts and the steering column opening trim panel reinforcement.
    • To install, tighten to 9 Nm (80 lb-in).
  4. NOTE: Release the upper steering column shroud by carefully pressing the sides inward.

    Remove the 3 lower steering column shroud screws, then separate and remove the upper and lower shrouds.

  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals