Section 132 (Climate Control System - General Information And Diagnostics): Specifications

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item	Specification	Fill Capacity
Motorcraft® A/C Cooling Coil Coating YN-29	-	-
Motorcraft® A/C System Flushing Solvent YN-23	-	-
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D	WSH-M1C231-B	118 ml (4 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada)	WSH-M17B19-A	0.60 kg (21 oz) (1.31 lb)
Stay-Brite® R-134a Leak Detection Dye 164-R6060 (Rotunda)	-	-

GENERAL SPECIFICATIONS

Item

Specification

A/C Compressor Magnetic Clutch

Air gap clearance

0.35-0.60 mm (0.014-0.024 in)

A/C Pressure Relief Valve ⁽¹⁾

Open pressures

3, 792-4, 137 kPa (550-600 psi)

Evaporator Discharge Air Temperature Sensor

OFF temperature

6°C (43°F)

ON temperature

7.5°C (45.5°F)

⁽¹⁾	Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve and the A/C pressure transducer location.

TORQUE SPECIFICATIONS

Description	Nm	lb-ft	lb-in
A/C compressor bolt	25	18	-