Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not necessary to remove the Audio Front Control Module (ACM) to retrieve the part number. For additional information, refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .

NOTE: Module configuration is required when a new ACM is being installed.

NOTE: Vehicles equipped with the base AM/FM radio do not require PMI.

Upload the ACM configuration information to the scan tool. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .
Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the 4 screws and the ACM.
- Disconnect the electrical connectors.
To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to PMI in MODULE CONFIGURATION .